I have a key (for a 2006 Ford Focus), and the bit that attaches it to the keyring has broken off.

I could fix this by drilling a hole in it, and attaching the keyring to that. But it's got some electronic doodads inside it (so you can't just copy the key and start the car with it). Where is a safe place to drill a hole in it? Or how can I work out (without an x-ray machine) where it's safe to drill?!

Key

asked Oct 16 '14 at 22:18

8 Answers 8

enter image description here

this is a key that the transponder went out on, cut it down with a razor knife. the transponder is a black magnet looking thing, I have it marked in white. as you can see, plenty of room on the upper for hole drilling

answered Sep 23 '16 at 17:44

Use some Sugru on it

Sugru'ed my alarm fob back together

It's rubbery in consistency so it won't just snap off when you drop your keys. Use a piece of metal or plastic for the "crossbar" and sugru around it.

answered Oct 16 '14 at 23:12

1

  • I added a link for those who don't know what Sugru is. (I first thought it was a typo for "sugar" and got very confused.)

    Oct 17 '14 at 15:46

Why not build up the back of the key with araldite [epoxy] and then drill that?

answered Oct 16 '14 at 23:03

0

answered Sep 23 '16 at 20:37

1

  • I must add that this is a very neat solution. I'd prefer this over sugru or anything like that.

    Sep 23 '16 at 22:56

The cover should come off (for replacing the battery and whatnot), then you can drill a hole wherever you like with the electronics in full view.

answered Oct 17 '14 at 9:19

3

  • No cover - no battery. I guess the transponder is something like RFID that doesn't need a power supply.

    Oct 17 '14 at 14:03

  • @JeremyMiles - That's exactly what it would be. There is a little chip in there which is energized by (usually) a ring which goes around the ignition switch, which then also reads the signal coming back from the transponder. Think of how the tags work at department stores when the detector goes off. No batteries there. The difference is, these have a unique and specific code which can be read from the computer when energized. If it matches what's stored in memory, the car starts. If not, the car won't stay running long if it starts at all.

    Oct 17 '14 at 20:26

  • So there's not even unlock/lock buttons on there? Lame!

    Oct 18 '14 at 17:36

enter image description here

I used a plastic suction cup, gold in half and super gluenit

answered Sep 12 '19 at 1:36

0

If you still have two working "CHIPPED" keys you can program a new third key. I had to do this a few years back on one of our work trucks. Buy a blank chip key, have it cut then follow the instructions in this link. FORD CHIP KEY Program
If you get it right it works first time. Then you can put the old broken one in the drawer as a back up.

answered Sep 23 '16 at 18:41

You can also make a "clone" with just one chipped key. lt will work on that vehicle but cannot make more keys. The trick is finding a locksmith to cut the key for you . Most either want to sell you a overpriced key of theirs or have gotten yelled at for messing one up before. I had them cut me a key on a plain blank ( older Ford pu key) , walked outside and when it worked ; I went back in and said " You do a great job, now cut this one. I understand the risks"

answered Dec 21 '19 at 23:22

Not the answer you're looking for? Browse other questions tagged ford key or ask your own question.